– Remove any existing appliances, trim, grout, or moldings that might interfere with the tile installation. Removing these will allow your tile to run straight and true through your home’s floor. You’ll also be able to clean underneath the tiles in a more efficient manner.
– Prepare the floor’s surface. Whether you are dealing with unfinished concrete, tile, stone, laminate, or linoleum, you need to prepare it to get a great tile installation. You’ll need some special cleaners, and products, as well as a few supplies of adhesive and a couple of brushes.
– Begin laying the tile installation. It’s not as hard as you think, especially if you’ve done it before. Make sure you have enough room around each piece, particularly the backsplash area, so you can work without interference. Don’t forget about corners – you may want to leave a space between pieces to allow for air to flow freely.
– Lay down the backing. If you’re working with a larger tile installation, lay the tiles one at a time on a single sheet. If you’re working with small pieces of tile, lay them one at a time on another sheet of paper and use a chalk line to mark off where they’ll go. If you need to cut tiles later, you’ll find that the process goes much smoother when you know where the cuts will be made.
Tile installation isn’t hard to do, and once you have finished you’ll be glad you took the extra steps to ensure a professional finish. If you’ve never done this before, take a bit of time and get a few tips from others who’ve done it before – and don’t hesitate to ask questions.
– If the file you’re using won’t come out quite the way you’d like, you can always have the contractor to come back and re-glue the piece for you. This can often be accomplished quickly and easily. In fact, it can even speed up the whole tile installation process.
– Tile installation doesn’t have to be difficult – you just need to know what you’re doing! This is certainly the case with tiles that have been laminated, so if you don’t have your own flooring installed, you should be okay. With this method as well.
With a little bit of patience and some guidance from a Colorado Springs tile flooring experts, tile installation should go over quite smoothly and with very few issues. So take the time to make sure you do everything right the first time. – there’s no sense in rushing the job.